|
|
Post by bulltrader on Jul 28, 2019 21:35:02 GMT -6
How do I calibrate the roller to roll a bigger roll. On the display it says 60" but it's more like 54.
Didn't realize it was off until I got a cousin to finish a field for me today. His is a 4x5 New Holland and his rolls were much bigger
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 30, 2019 7:51:52 GMT -6
It's really easy with the E-Link Pro monitor, but I don't think the M used that so unless I'm mistaken about that I won't be any help. But I would think there would be a "calibrate bale size" function that would allow you adjust it. If I knew my baler was making 54" bales when the monitor read 60", I would make a bale and stop when the monitor read 60", keep the bale in the chamber, shut off the pto, then enter the calibrate bale size function and hit the minus key until it read 54"
|
|
|
|
Post by bulltrader on Jul 30, 2019 8:19:47 GMT -6
It's really easy with the E-Link Pro monitor, but I don't think the M used that so unless I'm mistaken about that I won't be any help. But I would think there would be a "calibrate bale size" function that would allow you adjust it. If I knew my baler was making 54" bales when the monitor read 60", I would make a bale and stop when the monitor read 60", keep the bale in the chamber, shut off the pto, then enter the calibrate bale size function and hit the minus key until it read 54" I will check that out. Out local dealer mechanic said he would come after work and help me. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 30, 2019 21:30:37 GMT -6
It's really easy with the E-Link Pro monitor, but I don't think the M used that so unless I'm mistaken about that I won't be any help. But I would think there would be a "calibrate bale size" function that would allow you adjust it. If I knew my baler was making 54" bales when the monitor read 60", I would make a bale and stop when the monitor read 60", keep the bale in the chamber, shut off the pto, then enter the calibrate bale size function and hit the minus key until it read 54" I will check that out. Out local dealer mechanic said he would come after work and help me. Support like that is more important than the brand. |
|
|
|
Post by bulltrader on Jul 30, 2019 21:32:51 GMT -6
I'm helping his son get a job so it works out great for all.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 7, 2019 9:59:01 GMT -6
Did you discover the secret?
|
|
|
|
Post by bulltrader on Aug 7, 2019 10:36:34 GMT -6
Haven't cut any hay again yet. I will get it to the right size.
|
|
